Joseph elevation data and contour lines
Wallowa County • Eastern Oregon • Town
Joseph sits at the north end of Wallowa Lake, a glacial lake held in by long moraines below the Wallowa Mountains. The granite peaks rise steeply just south of town, while the open floor of the Wallowa Valley stretches north.
Download topographic data
- Contour lines: GeoJSON, Shapefile, DXF, KML, SVG and PDF
- 3D models: STL and OBJ for 3D printing and modeling
- Elevation model: GeoTIFF of the bare-earth DEM
- Data source: USGS 3D Elevation Program lidar, public domain
Create elevation profiles
- Hiking routes: Plan trails with the climb and descent along the way
- Cycling routes: See the climbs and descents before you ride
- Sites and driveways: Cross-sections for site planning and permit drawings
- Interactive chart: Hover to read the elevation at any point
Sun and terrain in Joseph
South-facing slopes get the most sun, especially in winter when the sun stays low. North-facing slopes and the floors of narrow valleys can stay in shade for much of the day. The Sunlight tool shows where the terrain around Joseph casts shade, and Slope & Aspect shows which way each slope faces.
The winter solstice on December 21 has the lowest sun and the longest shadows, and the summer solstice on June 21 has the highest sun. Compare the two to see how a site changes through the year.
Tools for Joseph
A PDF terrain report for a taxlot: hillshade, contours, slope and elevation statistics.
How the tool worksContour lines at the interval you choose, on the map and as vector files.
How the tool worksHours of direct sun on any day of the year, with shadows cast by the terrain.
How the tool worksMore in Wallowa County
Lidar coverage, property boundaries and every tool for the county: Wallowa County elevation and terrain tools.
About the elevation data for Joseph
The tools read the USGS 3D Elevation Program (3DEP) bare-earth elevation model, built from airborne lidar: 3.3 ft per pixel where lidar has been flown, with buildings and vegetation removed, and elevations above NAVD 88. Most of Oregon’s lidar was flown through the Oregon Lidar Consortium, run by DOGAMI. The data suits:
- GIS users: Import contour lines straight into QGIS, ArcGIS or other GIS software
- Architects, engineers and surveyors: Terrain for site design and planning
- Hikers and trail runners: Plan routes with accurate elevation profiles
- Property buyers and rural landowners: Check slope, sun and drainage before you buy or build
- Teachers: Geography, geology and earth science lessons
- 3D printing: Make a physical terrain model of Joseph
USGS 3DEP data is in the public domain, so it can be used commercially. Every file you download from this site still names its sources. The elevation on this page is the bare ground at Joseph’s point in the USGS Geographic Names Information System, rounded to the nearest 100 ft, and can differ from signs and printed maps.